Smart 100/125

CHARACTERISTICS

• Intelligent electronics and integrated functions ensure an optimal level of comfort.
• High delivery capacity of up to 133 m³/h and quiet operation thanks to the special motor design and the aerodynamic impeller.
• Efficient DC motor with minimal energy consumption of a maximum of 3.8 W and reliable continuous operation with over 50,000 operating hours.
• Flexible power connection parameters from 100 V to 240 V with 50 Hz or 60 Hz offer flexible use with various electrical standards.
• The fan automatically switches off the power supply if the impeller is blocked.
• Low noise level thanks to the unique mounting of the motor and impeller on vibration dampers.
• The built-in slide switch allows you to easily disconnect the fan from the power supply and guarantees safe operation.
• Super slim case, only 28 mm deep.
• Versatile mounting - vertical or horizontal mounting position.
• Replaceable connecting pieces for connecting to ventilation pipes with a diameter of ⌀100 or 125 mm.
• The impeller can be removed from the frame for assembly and maintenance without tools.
• Setting the functions and controlling the operation via remote control.

OPERATIONAL MODES & FUNCTIONS

The fan was developed based on the latest technology in ventilation technology:

Intelligent humidity sensor

It is equipped with an intelligent humidity sensor to automatically maintain the natural room climate.

QUIET - operating mode with optimal moisture removal, which ensures sufficient delivery capacity (up to 88 m³/h) with quiet operation. The operating mode is recommended for small bathrooms, for example.

MAXIMUM - operating mode for removing excessive moisture. The high ventilation level of the fan ensures maximum delivery capacity (up to 133 m³/h). This operating mode is recommended for bathrooms larger than 6 m².

Timer

The fan is equipped with three different timers that ensure optimal comfort levels:

HUMIDITY DELAY SWITCH - Setting the running time of the fan for complete moisture removal after the room humidity has stabilized (30, 45, 60 minutes).

AFTER-RUN SWITCH - Setting the running time of the fan according to the signal from the IR sensor or after confirmation from the external switch, within. of 5, 15 or 30 minutes. The fan then returns to previous operation.

SWITCH-ON DELAY - If you use the bathroom frequently and only for a short time, you can set the switch-on delay time to avoid turning on the fan unnecessarily.

The fan starts 0, 2 or 5 minutes after the external switch, humidity sensor or application sensor has given a signal.

24 hours

The fan runs at a low ventilation level and ensures minimal air exchange in the room. After the humidity rises, the fan switches to MAXIMUM (default) or QUIET operation. After the signal from the IR sensor or external switch, the fan is switched to QUIET mode.

Intermittent ventilation

An integrated function that ensures automatic ventilation of the room. After 15 hours of standstill, the fan is switched on for 2 hours with a delivery rate of 83/72 m³/h (⌀125 / ⌀100).

Speed control

The speed control can be set in 10 ventilation levels:

• for QUIET: operation from 40/33 to 83/72 m³/h (⌀125 / ⌀100)
• for MAXIMUM: operation from 83/72 to 133/106 m³/h (⌀125 / ⌀100)